|
|
|
|
-------------------- MRO Chemicals -------------------- |
|
|
AdPro
offers a wide range of putty, liquid or brushable or stick
types with extremely high temperature and abrasion resistance. All
types show an excellent resistance to aggressive media Most different
materials may be reliably and durably bonded, to themselves and among
each other, e.g. Iron, Steel, Hard Metal, Bronze, Lead, Aluminum,
Brass, Copper, Glass and ceramics, concrete and wood as well as many
rigid plastics (Except PTFE, Polyethylene and polypropylene). Detailed
product information as well as technical data and MSDS can be obtained
on request.
|
| |
AdPro
PM
AdPro PM is Plastic Metal is ideal for providing fast, cost effective
and durable repairs to many different types of material. It is also
suitable for tool and mould making. AdPro plastic metals is two part
component epoxy resin systems. After mixing plastic metal hardens
to a firm, metal like material which immediately adheres to almost
every kind of surface, It can machinable, drilled, milled, ground,
field after full curing. Application- ideal for repair on aluminum
and light alloy, reconditioning and repairing castings, pipes and
tanks, filling blow holes and micro porosity, working over shafts,
sliding bearings pumps and housing, making molded parts, dies fixing
devices and welding without preheating (Wherever welding is problematic
or impossible). |
| |
AdPro
SP AdPro SP is steel - filled putty temperature resistant
from - 350C up to 1200C. Use full for all repair jobs e.g. elimination
of corrosion damages and pitting on tanks, pipes & castings, cracks
on housing and machine parts etc. |
|
| |
AdPro
BR is Bronze-filled putty temperature resistant from -350C
up to 1200C. suitable for bronze equipment parts e.g. propellers,
impellers, castings, for Patch up and rebuilding where brazing is
undesirable or impossible. Also bond strongly to all other metals,
such as brass, copper and ferrow metals. |
|
|
AdPro AL is Aluminum-filled liquid temperature resistant
from-350C up to 2200C. High temperature resistant casting resin system
especially for industrial use. Non-corroding, anti-magnetic and cures
practically without shrinkage.
|
| |
AdPro
QS is Steel-filled-putty Super fast curing temperature
resistant from-350C up to 900C. The universal type for quick repair
due to its fast-curing properties (Pot life 5 minute, may be machined
after 45 minutes). Very useful for quick repair of transformer leakage's,
leaky pipes, housing and gears, for making anchorage's and for and
for making fixing device |
AdPro SL is steel-filled liquid temperature resistant from
-350C up to 1200C. Due to its liquid consistency and low viscosity
AdPro SL is particularly suitable for filling blow holes and micro
porosity's on castings, reproduction in mould and model making, making
tools and templates, gauges & fixtures and as well as for general
repair works where a castable compound is advantageous.
|
|
| |
AdPro
AP is Aluminum-filled putty temperature resistant from
-350C up to 2200C. Suitable for on aluminum or alloy, magnesium and
other light metals. Useful for filling blowholes on light alloy casting,
reconditioning of parts. Non-corroding and anti-magnetic. |
|
|
AdPro WRP is Steel-filled-wear resistant putty temperature
resistant from-350C up to 1200C. WRP is used to prevent wear on metal
surface which are exposed to extreme abrasion and erosion.
|
| |
|
AdPro
HT 2000 is Steel-filled-high quality putty- extreme temperature
resistant up to 10930C (20000F). 1:1 mixing ratio may be used on
vertical surface. Useful for repairing & bonding casting and
metal parts. |
AdPro CB is ceramic blue liquid-brushable- mineral (carborundum
and zircon) - Filled-extremely wear resistant-high temperature resistant
from -350C up to 1800C. From a smooth surface of low friction which
shows a high chemical Resistance and protect the surface exposed to
extremely high wear and Abrasion. Used for lining highly corrosive
& stressed pump casing.
|
|
AdPro
ST is super tough titanium filled putty, temperature resistant
from -350C up to 1500C. ST is especially designed to repair/rebuild
of worn-out shafts, valves, wearing plates, ball bearing seats & housing, pumps, propellers etc. Excellent mechanical strength and
chemical resistant.
|
AdPro
MAGIC STICK
MS - Aluminum
MS - Titanium
MS - Plastic
MS - Copper
MS - Steel
MS - Aqua
MS - Wood |
|
|
|
|
