|
|
|
---------------------
Insulation ---------------------
|
|
|
AdPro Insu having a wide range of various classes of insulating materials
e.g. heat shrinkable, thermal, electrical and as well as cold insulations.
|
AdPro
Insu Red Varnish :
Air drying, pigmented finishing varnish in spray cans with a short
tack-free time (approx. 10 min) for the protection of electrical windings
as well as for final coating of machinery, motors and housings. Class
- F insulation. |
AdPro
InsuProtek :
Air-drying, pigmented finishing varnish with good resistance against
chemicals and tropical climates, based on urethane modified polyester
resins.
|
|
AdPro
Insu Anti-Track:
Anti track coating to prevent arching, tracking and flash over caused
by dirt, dust, moisture on bus bars ends, bushings and insulators. |
|
|
AdPro
ConfoCoat:
Clear, transparent, especially for the insulating protection of assembled
printed circuit boards. High level of electrical properties and good
protection against corrosion, even when there are small residues of
"no clean fluxes" on the soldered PCBs. Excellent adhesion
on most standard solder resists. |
AdPro
InsuTape:
Self-fusing insulation tapes with Di-electric strength upto 36KV in
1 mm of insulation. It maintains tight insulation build up for wide
free electrical stability and permanent resistance to moisture penetration
compatible with all extruded di-electric cable insulations. Excellent
tensile strength, elongation, fusion and heat resistance. |
AdPro
Wonder Coat :
Brush able two component compound ideally formulated to provide outstanding
adhesion, corrosion resistance. Electrical insulation and mechanical
properties of epoxy resin. A 0.5mm thickness in 1 coat will have a
property of 15KV/mm Di-electric strength. It builds high electrically
insulating coating for live conductors to stop electrical theft and
also very useful for coating of Bus bars. |
AdPro
ThermoSeal :
It is heat shrinkable specially designed to insulate medium voltage
bus bars up to 36KV, shrouding on telephone lines, power cables e.t.c.
|
|
AdPro
ThermoMold :
Heat shrinkable end caps, boots, shapes for sealing cable ends, pipes
conduits multi conductor cables and terminations. |
|
